PAT testing when working from home: what you need to know

PAT testing when working from home: what you need to know

What do you need to know about PAT testing when working from home? Here’s our guide to keeping your home office safe.

Working from home has a lot of benefits. Not only are you saving money on commuting and expensive lunches out… but there are so many meetings that can now be carried out as emails!

As you are in a familiar environment when working from home, you may let your guard down a little. However, it’s just as important as ever to stay safe and protect yourself from potential hazards.

Here are some of the ways you can keep your electrical equipment safe when working from home, and how PAT testing at home can be beneficial.

Don’t leave laptops and phones charging on a bed or soft surface

As lovely as it would be for everyone to have a dedicated space to work, this isn’t always the case. Some of us have to work wherever we can, whether that is in the kitchen, living room, or bedroom!

If this is the case, don’t leave your laptop or phone charging on a soft surface while you take a lunch break or pop out to run an errand.

This happens more than you might think. For example, according to our research, 1 in 12 people leave their phone charging under a pillow.

Why is this so dangerous? It can block vents and cause the device to overheat, causing a potential fire risk.

If you need to charge your work equipment, do it on a hard, non-flammable surface like a table or countertop.

Check your equipment before you use it

You wouldn’t get in a car that has a wheel falling off and a smashed windscreen… so why would you use a laptop or computer that is looking worse for wear?

Always get in the habit of checking your work equipment before you use it. Look for the following:

Cable:

  • Is the cable frayed?
  • Are the wires exposed?
  • Is the cable a potential trip hazard?

Why damaged electrical cables need to be replaced

Equipment casing:

  • Is the casing cracked?
  • Is the casing warped?
  • Is the casing discoloured?
  • Is the casing scorched or burned?

Plug socket

  • Is the plug socket damaged?
  • Are the pins loose?

The environment:

  • Are you using extension reels or sockets? If yes, are they coiled, twisted, or overloaded?
  • Can you hear, smell, or see anything unusual when you turn the equipment on?

If you are concerned about the equipment you have been given, don’t use it, and ask your line manager to arrange a replacement.

PAT testing your home office equipment is one of the best ways to keep monitors, laptops, and other electrical appliances safe when working from home.

Don’t overload plug sockets

Extension leads can come in handy when working from home, but you need to take care not to overload them.

Find out how to use extension leads at home safely.

Turn off and unplug equipment if you’re not using it

It’s 5 pm and the working day is done.

Before you take the short commute from the office to the living room or kitchen, be sure to turn off and unplug your equipment.

Plugged in equipment still draws small amounts of power, meaning that it could potentially overheat when you are not in the room.

Another benefit of this is that you can save up to £80 a year by taking your equipment off standby.

Staying safe and having money in your pocket is always a winning combination!

Take care if you have created a new office space

Many people built ‘shoffices’ during lockdown – home offices in outbuildings like sheds, garages, sunrooms, and conservatories.

These new spaces can have a higher risk of fire. This is because the buildings are more prone to water, snow, and ice, and have fewer electrical sockets than rooms in the home.

PAT testing at home – why it is so important

If staff are working from home, you are still responsible for their safety and well-being.

If you get PAT testing carried out in the workplace, you need to extend it to home workers too.

There are two ways of carrying out PAT testing for your home workers. You can get the engineer to visit them at home or ask your employees to bring their equipment in for testing when they next come into the office.

We’re the UKs Number 1  trusted voice of experience in the industry, who are regularly consulted to give our expert opinions with industry governing bodies.

Through our national network of fully certified engineers, Hawkesworth provide a range of technical compliance and testing services to ensure you’re not at risk – we’ve got you covered!

From your Electrical Installation and Portable Appliances with EICRPAT and Thermographic surveys to Fire Safety with Fire Risk Assessments, Fire Alarm Testing and Emergency Lighting.

Get in touch and see how we can help you